1 /* 2 * Copyright (C) 2016 The Android Open Source Project 3 * 4 * Licensed under the Apache License, Version 2.0 (the "License"); 5 * you may not use this file except in compliance with the License. 6 * You may obtain a copy of the License at 7 * 8 * http://www.apache.org/licenses/LICENSE-2.0 9 * 10 * Unless required by applicable law or agreed to in writing, software 11 * distributed under the License is distributed on an "AS IS" BASIS, 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 13 * See the License for the specific language governing permissions and 14 * limitations under the License. 15 */ 16 17 #ifndef ANDROID_HARDWARE_STREAM_HAL_LOCAL_H 18 #define ANDROID_HARDWARE_STREAM_HAL_LOCAL_H 19 20 #include <media/audiohal/StreamHalInterface.h> 21 #include "StreamPowerLog.h" 22 23 namespace android { 24 namespace CPP_VERSION { 25 26 class DeviceHalLocal; 27 28 class StreamHalLocal : public virtual StreamHalInterface 29 { 30 public: 31 // Return size of input/output buffer in bytes for this stream - eg. 4800. 32 virtual status_t getBufferSize(size_t *size); 33 34 // Return the base configuration of the stream: 35 // - channel mask; 36 // - format - e.g. AUDIO_FORMAT_PCM_16_BIT; 37 // - sampling rate in Hz - eg. 44100. 38 virtual status_t getAudioProperties(audio_config_base_t *configBase); 39 40 // Set audio stream parameters. 41 virtual status_t setParameters(const String8& kvPairs); 42 43 // Get audio stream parameters. 44 virtual status_t getParameters(const String8& keys, String8 *values); 45 46 // Add or remove the effect on the stream. 47 virtual status_t addEffect(sp<EffectHalInterface> effect); 48 virtual status_t removeEffect(sp<EffectHalInterface> effect); 49 50 // Put the audio hardware input/output into standby mode. 51 virtual status_t standby(); 52 53 virtual status_t dump(int fd, const Vector<String16>& args) override; 54 55 // Start a stream operating in mmap mode. 56 virtual status_t start() = 0; 57 58 // Stop a stream operating in mmap mode. 59 virtual status_t stop() = 0; 60 61 // Retrieve information on the data buffer in mmap mode. 62 virtual status_t createMmapBuffer(int32_t minSizeFrames, 63 struct audio_mmap_buffer_info *info) = 0; 64 65 // Get current read/write position in the mmap buffer 66 virtual status_t getMmapPosition(struct audio_mmap_position *position) = 0; 67 68 // Set the priority of the thread that interacts with the HAL 69 // (must match the priority of the audioflinger's thread that calls 'read' / 'write') 70 virtual status_t setHalThreadPriority(int priority); 71 72 protected: 73 // Subclasses can not be constructed directly by clients. 74 StreamHalLocal(audio_stream_t *stream, sp<DeviceHalLocal> device); 75 76 // The destructor automatically closes the stream. 77 virtual ~StreamHalLocal(); 78 79 sp<DeviceHalLocal> mDevice; 80 81 // mStreamPowerLog is used for audio signal power logging. 82 StreamPowerLog mStreamPowerLog; 83 84 private: 85 audio_stream_t *mStream; 86 }; 87 88 class StreamOutHalLocal : public StreamOutHalInterface, public StreamHalLocal { 89 public: 90 // Return the frame size (number of bytes per sample) of a stream. 91 virtual status_t getFrameSize(size_t *size); 92 93 // Return the audio hardware driver estimated latency in milliseconds. 94 virtual status_t getLatency(uint32_t *latency); 95 96 // Use this method in situations where audio mixing is done in the hardware. 97 virtual status_t setVolume(float left, float right); 98 99 // Selects the audio presentation (if available). 100 virtual status_t selectPresentation(int presentationId, int programId); 101 102 // Write audio buffer to driver. 103 virtual status_t write(const void *buffer, size_t bytes, size_t *written); 104 105 // Return the number of audio frames written by the audio dsp to DAC since 106 // the output has exited standby. 107 virtual status_t getRenderPosition(uint32_t *dspFrames); 108 109 // Get the local time at which the next write to the audio driver will be presented. 110 virtual status_t getNextWriteTimestamp(int64_t *timestamp); 111 112 // Set the callback for notifying completion of non-blocking write and drain. 113 virtual status_t setCallback(wp<StreamOutHalInterfaceCallback> callback); 114 115 // Returns whether pause and resume operations are supported. 116 virtual status_t supportsPauseAndResume(bool *supportsPause, bool *supportsResume); 117 118 // Notifies to the audio driver to resume playback following a pause. 119 virtual status_t pause(); 120 121 // Notifies to the audio driver to resume playback following a pause. 122 virtual status_t resume(); 123 124 // Returns whether drain operation is supported. 125 virtual status_t supportsDrain(bool *supportsDrain); 126 127 // Requests notification when data buffered by the driver/hardware has been played. 128 virtual status_t drain(bool earlyNotify); 129 130 // Notifies to the audio driver to flush the queued data. 131 virtual status_t flush(); 132 133 // Return a recent count of the number of audio frames presented to an external observer. 134 virtual status_t getPresentationPosition(uint64_t *frames, struct timespec *timestamp); 135 136 // Start a stream operating in mmap mode. 137 virtual status_t start(); 138 139 // Stop a stream operating in mmap mode. 140 virtual status_t stop(); 141 142 // Retrieve information on the data buffer in mmap mode. 143 virtual status_t createMmapBuffer(int32_t minSizeFrames, 144 struct audio_mmap_buffer_info *info); 145 146 // Get current read/write position in the mmap buffer 147 virtual status_t getMmapPosition(struct audio_mmap_position *position); 148 149 // Called when the metadata of the stream's source has been changed. 150 status_t updateSourceMetadata(const SourceMetadata& sourceMetadata) override; 151 152 // Returns the Dual Mono mode presentation setting. 153 status_t getDualMonoMode(audio_dual_mono_mode_t* mode) override; 154 155 // Sets the Dual Mono mode presentation on the output device. 156 status_t setDualMonoMode(audio_dual_mono_mode_t mode) override; 157 158 // Returns the Audio Description Mix level in dB. 159 status_t getAudioDescriptionMixLevel(float* leveldB) override; 160 161 // Sets the Audio Description Mix level in dB. 162 status_t setAudioDescriptionMixLevel(float leveldB) override; 163 164 // Retrieves current playback rate parameters. 165 status_t getPlaybackRateParameters(audio_playback_rate_t* playbackRate) override; 166 167 // Sets the playback rate parameters that control playback behavior. 168 status_t setPlaybackRateParameters(const audio_playback_rate_t& playbackRate) override; 169 170 status_t setEventCallback(const sp<StreamOutHalInterfaceEventCallback>& callback) override; 171 172 private: 173 audio_stream_out_t *mStream; 174 wp<StreamOutHalInterfaceCallback> mCallback; 175 wp<StreamOutHalInterfaceEventCallback> mEventCallback; 176 177 friend class DeviceHalLocal; 178 179 // Can not be constructed directly by clients. 180 StreamOutHalLocal(audio_stream_out_t *stream, sp<DeviceHalLocal> device); 181 182 virtual ~StreamOutHalLocal(); 183 184 static int asyncCallback(stream_callback_event_t event, void *param, void *cookie); 185 186 static int asyncEventCallback(stream_event_callback_type_t event, void *param, void *cookie); 187 188 void doUpdateSourceMetadataV7(const SourceMetadata& sourceMetadata); 189 void doUpdateSourceMetadata(const SourceMetadata& sourceMetadata); 190 }; 191 192 class StreamInHalLocal : public StreamInHalInterface, public StreamHalLocal { 193 public: 194 // Return the frame size (number of bytes per sample) of a stream. 195 virtual status_t getFrameSize(size_t *size); 196 197 // Set the input gain for the audio driver. 198 virtual status_t setGain(float gain); 199 200 // Read audio buffer in from driver. 201 virtual status_t read(void *buffer, size_t bytes, size_t *read); 202 203 // Return the amount of input frames lost in the audio driver. 204 virtual status_t getInputFramesLost(uint32_t *framesLost); 205 206 // Return a recent count of the number of audio frames received and 207 // the clock time associated with that frame count. 208 virtual status_t getCapturePosition(int64_t *frames, int64_t *time); 209 210 // Start a stream operating in mmap mode. 211 virtual status_t start(); 212 213 // Stop a stream operating in mmap mode. 214 virtual status_t stop(); 215 216 // Retrieve information on the data buffer in mmap mode. 217 virtual status_t createMmapBuffer(int32_t minSizeFrames, 218 struct audio_mmap_buffer_info *info); 219 220 // Get current read/write position in the mmap buffer 221 virtual status_t getMmapPosition(struct audio_mmap_position *position); 222 223 // Get active microphones 224 virtual status_t getActiveMicrophones(std::vector<media::MicrophoneInfo> *microphones); 225 226 // Sets microphone direction (for processing) 227 virtual status_t setPreferredMicrophoneDirection(audio_microphone_direction_t direction); 228 229 // Sets microphone zoom (for processing) 230 virtual status_t setPreferredMicrophoneFieldDimension(float zoom); 231 232 // Called when the metadata of the stream's sink has been changed. 233 status_t updateSinkMetadata(const SinkMetadata& sinkMetadata) override; 234 235 private: 236 audio_stream_in_t *mStream; 237 238 friend class DeviceHalLocal; 239 240 // Can not be constructed directly by clients. 241 StreamInHalLocal(audio_stream_in_t *stream, sp<DeviceHalLocal> device); 242 243 virtual ~StreamInHalLocal(); 244 245 void doUpdateSinkMetadata(const SinkMetadata& sinkMetadata); 246 void doUpdateSinkMetadataV7(const SinkMetadata& sinkMetadata); 247 }; 248 249 } // namespace CPP_VERSION 250 } // namespace android 251 252 #endif // ANDROID_HARDWARE_STREAM_HAL_LOCAL_H 253