/*
 * Copyright (C) 2023 Huawei Device Co., Ltd.
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/**
 * @addtogroup AudioDecoder
 * @{
 *
 * @brief The AudioDecoder module provides functions for audio decoding.
 *
 * @syscap SystemCapability.Multimedia.Media.AudioDecoder
 * @since 9
 */

/**
 * @file native_avcodec_audiodecoder.h
 *
 * @brief Declare the Native API used for audio decoding.
 *
 * @kit AVCodecKit
 * @library libnative_media_adec.so
 * @syscap SystemCapability.Multimedia.Media.AudioDecoder
 * @since 9
 */

#ifndef NATIVE_AVCODEC_AUDIODECODER_H
#define NATIVE_AVCODEC_AUDIODECODER_H

#include <stdint.h>
#include <stdio.h>
#include "native_avcodec_base.h"

#ifdef __cplusplus
extern "C" {
#endif

/**
 * @brief Creates an audio decoder instance from the mime type, which is recommended in most cases.
 * @syscap SystemCapability.Multimedia.Media.AudioDecoder
 * @param mime mime type description string, refer to {@link AVCODEC_MIME_TYPE}
 * @return Returns a Pointer to an OH_AVCodec instance
 * @deprecated since 11
 * @useinstead OH_AudioCodec_CreateByMime
 * @since 9
 * @version 1.0
 */
OH_AVCodec *OH_AudioDecoder_CreateByMime(const char *mime);

/**
 * @brief Create an audio decoder instance through the audio decoder name.
 * The premise of using this interface is to know the exact name of the decoder.
 * @syscap SystemCapability.Multimedia.Media.AudioDecoder
 * @param name Audio codec name
 * @return Returns a Pointer to an OH_AVCodec instance
 * @deprecated since 11
 * @useinstead OH_AudioCodec_CreateByName
 * @since 9
 * @version 1.0
 */
OH_AVCodec *OH_AudioDecoder_CreateByName(const char *name);

/**
 * @brief Clear the internal resources of the decoder and destroy the decoder instance
 * @syscap SystemCapability.Multimedia.Media.AudioDecoder
 * @param codec Pointer to an OH_AVCodec instance
 * @return Returns AV_ERR_OK if the execution is successful,
 * otherwise returns a specific error code, refer to {@link OH_AVErrCode}
 * @deprecated since 11
 * @useinstead OH_AudioCodec_Destroy
 * @since 9
 * @version 1.0
 */
OH_AVErrCode OH_AudioDecoder_Destroy(OH_AVCodec *codec);

/**
 * @brief Set the asynchronous callback function so that your application
 * can respond to the events generated by the audio decoder. This interface must be called before Prepare is called.
 * @syscap SystemCapability.Multimedia.Media.AudioDecoder
 * @param codec Pointer to an OH_AVCodec instance
 * @param callback A collection of all callback functions, see {@link OH_AVCodecAsyncCallback}
 * @param userData User specific data
 * @return Returns AV_ERR_OK if the execution is successful,
 * otherwise returns a specific error code, refer to {@link OH_AVErrCode}
 * @deprecated since 11
 * @useinstead OH_AudioCodec_RegisterCallback
 * @since 9
 * @version 1.0
 */
OH_AVErrCode OH_AudioDecoder_SetCallback(OH_AVCodec *codec, OH_AVCodecAsyncCallback callback, void *userData);

/**
 * @brief To configure the audio decoder, typically, you need to configure the description information of the decoded
 * audio track, which can be extracted from the OH_AVSource. This interface must be called before Prepare is called.
 * @syscap SystemCapability.Multimedia.Media.AudioDecoder
 * @param codec Pointer to an OH_AVCodec instance
 * @param format A pointer to an OH_AVFormat giving a description of the audio track to be decoded
 * @return Returns AV_ERR_OK if the execution is successful,
 * otherwise returns a specific error code, refer to {@link OH_AVErrCode}
 * @deprecated since 11
 * @useinstead OH_AudioCodec_Configure
 * @since 9
 * @version 1.0
 */
OH_AVErrCode OH_AudioDecoder_Configure(OH_AVCodec *codec, OH_AVFormat *format);

/**
 * @brief To prepare the internal resources of the decoder, the Configure interface must be called
 * before calling this interface.
 * @syscap SystemCapability.Multimedia.Media.AudioDecoder
 * @param codec Pointer to an OH_AVCodec instance
 * @return Returns AV_ERR_OK if the execution is successful,
 * otherwise returns a specific error code, refer to {@link OH_AVErrCode}
 * @deprecated since 11
 * @useinstead OH_AudioCodec_Prepare
 * @since 9
 * @version 1.0
 */
OH_AVErrCode OH_AudioDecoder_Prepare(OH_AVCodec *codec);

/**
 * @brief Start the decoder, this interface must be called after the Prepare is successful.
 * After being successfully started, the decoder will start reporting NeedInputData events.
 * @syscap SystemCapability.Multimedia.Media.AudioDecoder
 * @param codec Pointer to an OH_AVCodec instance
 * @return Returns AV_ERR_OK if the execution is successful,
 * otherwise returns a specific error code, refer to {@link OH_AVErrCode}
 * @deprecated since 11
 * @useinstead OH_AudioCodec_Start
 * @since 9
 * @version 1.0
 */
OH_AVErrCode OH_AudioDecoder_Start(OH_AVCodec *codec);

/**
 * @brief Stop the decoder. After stopping, you can re-enter the Started state through Start,
 * but it should be noted that need to re-enter if the decoder has been input before
 * Codec-Specific-Data.
 * @syscap SystemCapability.Multimedia.Media.AudioDecoder
 * @param codec Pointer to an OH_AVCodec instance
 * @return Returns AV_ERR_OK if the execution is successful,
 * otherwise returns a specific error code, refer to {@link OH_AVErrCode}
 * @deprecated since 11
 * @useinstead OH_AudioCodec_Stop
 * @since 9
 * @version 1.0
 */
OH_AVErrCode OH_AudioDecoder_Stop(OH_AVCodec *codec);

/**
 * @brief Clear the input and output data buffered in the decoder. After this interface is called, all the Buffer
 * indexes previously reported through the asynchronous callback will be invalidated, make sure not to access
 * the Buffers corresponding to these indexes.
 * @syscap SystemCapability.Multimedia.Media.AudioDecoder
 * @param codec Pointer to an OH_AVCodec instance
 * @return Returns AV_ERR_OK if the execution is successful,
 * otherwise returns a specific error code, refer to {@link OH_AVErrCode}
 * @deprecated since 11
 * @useinstead OH_AudioCodec_Flush
 * @since 9
 * @version 1.0
 */
OH_AVErrCode OH_AudioDecoder_Flush(OH_AVCodec *codec);

/**
 * @brief Reset the decoder. To continue decoding, you need to call the Configure interface again to
 * configure the decoder instance.
 * @syscap SystemCapability.Multimedia.Media.AudioDecoder
 * @param codec Pointer to an OH_AVCodec instance
 * @return Returns AV_ERR_OK if the execution is successful,
 * otherwise returns a specific error code, refer to {@link OH_AVErrCode}
 * @deprecated since 11
 * @useinstead OH_AudioCodec_Reset
 * @since 9
 * @version 1.0
 */

OH_AVErrCode OH_AudioDecoder_Reset(OH_AVCodec *codec);

/**
 * @brief Get the description information of the output data of the decoder, refer to {@link OH_AVFormat} for details.
 * It should be noted that the life cycle of the OH_AVFormat instance pointed to by the return value * needs to
 * be manually released by the caller
 * @syscap SystemCapability.Multimedia.Media.AudioDecoder
 * @param codec Pointer to an OH_AVCodec instance
 * @return Returns the OH_AVFormat handle pointer, the life cycle is refreshed with the next GetOutputMediaDescription,
 * or destroyed with OH_AVCodec;
 * @deprecated since 11
 * @useinstead OH_AudioCodec_GetOutputDescription
 * @since 9
 * @version 1.0
 */
OH_AVFormat *OH_AudioDecoder_GetOutputDescription(OH_AVCodec *codec);

/**
 * @brief Set dynamic parameters to the decoder. Note: This interface can only be called after the decoder is started.
 * At the same time, incorrect parameter settings may cause decoding failure.
 * @syscap SystemCapability.Multimedia.Media.AudioDecoder
 * @param codec Pointer to an OH_AVCodec instance
 * @param format OH_AVFormat handle pointer
 * @return Returns AV_ERR_OK if the execution is successful,
 * otherwise returns a specific error code, refer to {@link OH_AVErrCode}
 * @deprecated since 11
 * @useinstead OH_AudioCodec_SetParameter
 * @since 9
 * @version 1.0
 */
OH_AVErrCode OH_AudioDecoder_SetParameter(OH_AVCodec *codec, OH_AVFormat *format);

/**
 * @brief Submit the input buffer filled with data to the audio decoder. The {@link OH_AVCodecOnNeedInputData} callback
 * will report the available input buffer and the corresponding index value. Once the buffer with the specified index
 * is submitted to the audio decoder, the buffer cannot be accessed again until the {@link OH_AVCodecOnNeedInputData}
 * callback is received again reporting that the buffer with the same index is available. In addition, for some
 * decoders, it is required to input Codec-Specific-Data to the decoder at the beginning to initialize the decoding
 * process of the decoder.
 * @syscap SystemCapability.Multimedia.Media.AudioDecoder
 * @param codec Pointer to an OH_AVCodec instance
 * @param index Enter the index value corresponding to the Buffer
 * @param attr Information describing the data contained in the Buffer
 * @return Returns AV_ERR_OK if the execution is successful,
 * otherwise returns a specific error code, refer to {@link OH_AVErrCode}
 * @deprecated since 11
 * @useinstead OH_AudioCodec_PushInputBuffer
 * @since 9
 * @version 1.0
 */
OH_AVErrCode OH_AudioDecoder_PushInputData(OH_AVCodec *codec, uint32_t index, OH_AVCodecBufferAttr attr);

/**
 * @brief Return the processed output Buffer to the decoder.
 * @syscap SystemCapability.Multimedia.Media.AudioDecoder
 * @param codec Pointer to an OH_AVCodec instance
 * @param index The index value corresponding to the output Buffer
 * @return Returns AV_ERR_OK if the execution is successful,
 * otherwise returns a specific error code, refer to {@link OH_AVErrCode}
 * @deprecated since 11
 * @useinstead OH_AudioCodec_FreeOutputBuffer
 * @since 9
 * @version 1.0
 */
OH_AVErrCode OH_AudioDecoder_FreeOutputData(OH_AVCodec *codec, uint32_t index);

/**
 * @brief Check whether the current codec instance is valid. It can be used fault recovery or app
 * switchback from the background
 * @syscap SystemCapability.Multimedia.Media.AudioDecoder
 * @param codec Pointer to an OH_AVCodec instance
 * @param isValid Output Parameter. A pointer to a boolean instance, it is true if the codec instance is valid,
 * false if the codec instance is invalid
 * @return Returns AV_ERR_OK if the execution is successful,
 * otherwise returns a specific error code, refer to {@link OH_AVErrCode}
 * @deprecated since 11
 * @useinstead OH_AudioCodec_IsValid
 * @since 10
 */
OH_AVErrCode OH_AudioDecoder_IsValid(OH_AVCodec *codec, bool *isValid);

#ifdef __cplusplus
}
#endif
#endif // NATIVE_AVCODEC_AUDIODECODER_H
/** @} */